Milagrow RoboPhelps 25 Fastest Swimming Pool Cleaning Robot 4 scrubbing wheels, 2 powerful motors Wet & Dry Vacuum Cleaner  (Blue)

Robotic Programming : Smart Z programming for Systematic Cleaning Robotic Balance Retains its balance if it turns over Robotic Reverse: If RoboPhelps exits the water in a beach-entry pool, it will reverse & attempt to re-enter water Robotic Injury Protection: The impeller automatically stops within 1 sec if it is taken out of water while it is working Robotic Self Preservation: Stops working in case some large foreign matter is obstructing it impeller Robotic Shut off : Shuts itself at the end of the cycle It can clean both Above Ground & In-ground Residential Pools of all shapes & is suitable for all surface types Tile (large & small), vinyl, Gunite, Fiberglass Cleaning Performance Maximum cleaning area in about 2 hours is 2100 Sq Ft in 2 hours Filtering or Suction Rate Water which passes through the Robot in a given time 18000 Liters/Hour Operating Cost is Rs 3 per hour Cleaning Features Cycle Time & Timers : Time taken by the pool robot to complete a cycle &timer settings available on the robot You can select from 3 settings 0.5h ( Pool size < 500 Sq ft), 1h (Pool Size 50 to 100 Sq ft) or 2h Pool Size > 100 Sq ft) Pool Cleaning Speed is Maximum 120?/h or 1300 Square Ft /h Cleaning Roller roller which scrubs & cleans is 34cm wide Floating Cable Standard Length : This can be extended also. This limits the width & length of cleaning area of the robot is 15m, i.e. 50 ft approximately The maximum height which the pool robot can climb. It also means the maximum depth the pool robot can clean is 180 cm ( Approx 6 ft or 1.8 m) Filter Bag Porosity: It is the size of the pores on the filter bag. It is 70 microns which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. Other Features The main unit has the highest Water 'Ingress Protection' (IP) rating of 68.